Design and integrate aircraft configurations for autonomous UAV platforms, supporting sizing, CAD modeling, aerodynamic and structural analysis, prototyping, and production transition. Requires a relevant bachelor's degree, 5 years of aircraft design experience, and an active Secret clearance.

Leads complex customer application programs from concept through production readiness for Carbon’s additive manufacturing technology. Requires 8+ years in product development or design, strong CAD/CAE and computational design skills, manufacturing expertise, and cross-functional leadership.

Installs and supports telematics hardware across customer vehicles and assets, while leading deployments, training customers, auditing installation quality, and troubleshooting technical issues. Requires extensive equipment installation experience, automotive electrical knowledge, physical capability, and extensive travel.

Leads flight-critical avionics and electrical subsystem design for autonomous aircraft, owning hardware development from concept through validation. Requires a bachelor’s degree or equivalent experience, 10+ years as an electrical engineer, and expertise in circuit design, testing, and debugging.

Conducts setup, operation, troubleshooting, and data analysis for battery energy-storage test systems supporting aircraft development. Requires a technical bachelor's degree, hands-on battery or electrochemical experience, and hardware-testing skills with instrumentation and data acquisition.

Senior physical design specialist supporting semiconductor customer engagements, AI-assisted chip-design solutions, and broader forward-deployed engineering delivery. Requires deep ASIC/SoC backend implementation expertise, tapeout experience, EDA fluency, and at least 7 years with a bachelor’s degree or 5 years with a master’s.

Leads flight-critical high- and low-voltage power electronics design for an autonomous aircraft, from concept through production and validation. Requires a bachelor’s degree in electrical engineering, 6+ years of power electronics experience, product-shipping experience, and technical leadership.

Design production PCB layouts for complex digital, analog, RF, high-speed, and power electronics used in aircraft. The role requires 10+ years of PCB layout experience and expertise in stack-ups, manufacturability, signal and power integrity, and Altium Designer.

Design, debug, validate, and support production of custom electrical hardware for autonomous and AI-driven vehicles and industrial equipment. The role is intended for a new graduate with an electrical or computer engineering degree and hands-on knowledge of circuit design, electronics, and PCB layout.

Design, integrate, validate, and release mechanical hardware for autonomous vehicle systems, spanning prototypes through mass production. The role requires at least two years of mechanical design experience, broad manufacturing-process knowledge, CAD proficiency, and experience with electromechanical hardware testing and supplier development.

Design and mature mechanical and thermal systems for high-power hybrid-electric propulsion, owning critical hardware from concept through production. The role requires 5+ years of complex mechanical design experience, rotating-machinery expertise, CAD/GD&T proficiency, and hands-on hardware development.

Leads the end-to-end development of dexterous robotic end-effectors, from concept and system architecture through prototyping, integration, and testing. Requires 5+ years developing robotic systems and experience with dexterous manipulation and electromechanical integration.

Builds, modifies, tests, and troubleshoots advanced electromechanical prototypes and lab systems. Requires 10+ years of hands-on technician experience, strong fabrication and diagnostic skills, and knowledge of motors, controls, and sensor interfaces.

Design, analyze, integrate, and validate mechanical hardware for self-driving vehicles, including sensor systems, compute assemblies, fixtures, and vehicle components. The role is intended for 2026 mechanical engineering graduates with hands-on hardware, CAD, and testing experience.

Leads RF and cellular hardware integration for autonomous drone products, covering wireless architecture, coexistence, validation, certification, and production. Requires an advanced electrical engineering degree, 7+ years of complex RF product experience, and deep LTE/cellular expertise.

Leads the design, modeling, scaling, commissioning, and optimization of high-temperature pyrometallurgical refining systems. Requires chemical, metallurgical, or process engineering expertise with experience in mineral processing, refining, or complex industrial process equipment.

Senior engineer responsible for designing and releasing automotive trim, seating, and lighting attachment interfaces through production launch. The role requires extensive OEM or Tier 1 experience, CATIA and PLM proficiency, supplier leadership, and expertise in validation, GD&T, and design for manufacturing.

Design, prototype, test, and troubleshoot high-performance mechanisms for field-deployed counter-drone hardware. The role requires 10+ years of mechanical engineering experience, deep kinematics and dynamics expertise, strong GD&T skills, and hands-on machining and failure analysis.

Hands-on technician responsible for assembling, maintaining, troubleshooting, repairing, and supporting field deployment of autonomous delivery robots. Requires mechanical and electrical systems experience, technical-documentation skills, safe electrical practices, and a valid driver’s license.

Design and build semiconductor fabrication equipment through rapid prototyping, mechanical analysis, and interdisciplinary engineering. The internship requires hands-on electromechanical design experience, a project portfolio, and pursuit of an engineering degree.

Hands-on semiconductor packaging intern designing, prototyping, and testing fabrication equipment and processes. Candidates should be pursuing an engineering degree, have lab or device-fabrication experience, and demonstrate substantial prototyping work through a portfolio.

Hands-on summer intern role focused on designing experiments, developing semiconductor and thin-film fabrication recipes, operating fab tools, and analyzing process data. Requires engineering degree pursuit, cleanroom and wafer-fabrication experience, and knowledge of semiconductor processing.

Design, prototype, test, and help manufacture compact RF power systems for semiconductor plasma applications. The internship requires hands-on RF systems experience, power amplifier and measurement-sensor design, and demonstrated ability to build complex hardware.

Electrical engineering interns will design, prototype, test, and integrate PCBAs and electrical systems for semiconductor fabrication equipment. The role requires an engineering degree in progress, strong electrical fundamentals, hands-on prototyping experience, and a portfolio of built systems.

Hands-on Hardware Technician supporting 3D printing, rapid prototyping, mechanical assembly, and lab infrastructure across engineering spaces. The role requires strong fabrication and printer-operation experience, with machining, soldering, wiring, and CAD experience preferred.

Leads networking, systems administration, instrumentation, and controls infrastructure for mineral-refining facilities, from equipment design through commissioning and ramp. Requires at least seven years of control-system networking experience, expert Ignition knowledge, and experience delivering large capital projects.

Leads instrumentation and controls engineering for mineral-refining equipment and plant infrastructure from design through commissioning and operations handover. Requires 7+ years of instrumentation experience, control and HMI programming, capital-project execution, and leadership of engineering teams.

Leads data center design optimization across space, power density, and cost, translating commercial requirements into engineering decisions. Requires 7+ years of infrastructure experience, strong electrical and mechanical systems knowledge, quantitative cost modeling, and cross-functional leadership.

Product design engineering intern developing and validating mechanical components and prototypes for autonomous drones. The role emphasizes 3D CAD, mechanical design, prototyping, testing, and collaboration with engineering and manufacturing partners.

Leads development and validation of steady-state and dynamic process models for integrated mineral refining systems. Requires 8+ years of process simulation experience, engineering expertise in transport and thermodynamics, and proficiency with industrial simulation tools.

Leads transistor architecture, electrical characterization, parameter extraction, and diagnostic analysis for in-house semiconductor device development. Requires a Ph.D. and deep expertise in CMOS/MOSFET physics, semiconductor measurement, probe stations, and data analysis.

Develops and optimizes semiconductor etch and fabrication processes through hands-on cleanroom experimentation, tool operation, recipe development, and process analysis. Requires a relevant engineering or materials degree and experience with multi-step fabrication flows and semiconductor equipment.

Leads hands-on development and optimization of semiconductor etch and thin-film fabrication processes, designing experiments, operating cleanroom tools, and troubleshooting recipes and equipment. Requires a PhD and 10 years of nanofabrication experience or equivalent expertise.

The Inkjet Technician role supports inkjet printing operations in Dandy’s dental technology environment. The provided posting contains no specific responsibilities or qualification requirements.

Leads industrial and mechanical design for Stripe Terminal payment hardware from concept through mass production, covering enclosure design, CMF, manufacturability, validation, and supplier qualification. Requires 8+ years of consumer or commercial hardware experience, Creo proficiency, and English and Mandarin communication skills.

Hands-on technician responsible for assembling, maintaining, troubleshooting, repairing, and operating autonomous delivery robots across workshop and field environments. Requires mechanical and electrical systems experience, technical documentation skills, safe AC/DC practices, and strong troubleshooting ability.

Leads prototype-to-production manufacturing for autonomous rail vehicles, including greenfield facility design, NPI, assembly-line development, tooling, and process documentation. Requires 5+ years of manufacturing engineering experience and ownership of an NPI launch.

Designs and owns major mechanical subsystems for autonomous mobile manipulators, including structural analysis, precision interfaces, prototyping, and validation. Requires a mechanical, aerospace, or robotics degree, 4–8 years of dynamic systems experience, and expertise in CAD, FEA, GD&T, and fabrication.

Supports deployment, operation, maintenance, and troubleshooting of RF, cryogenic, vacuum, and electro-mechanical systems at customer sites worldwide. Requires hands-on dilution refrigerator experience, strong laboratory hardware expertise, customer-facing communication, and substantial international travel.

Leads technical development, industrialization, and recovery efforts for aerospace mechanical suppliers, ensuring manufacturing readiness, quality, capacity, and production performance. Requires a bachelor's degree, 7+ years of regulated-manufacturing experience, strong aerospace process knowledge, and the ability to obtain a U.S. security clearance.

Leads system-level signal integrity and power integrity analysis for high-speed AI compute hardware across silicon, packages, PCBs, flex circuits, and connectors. Requires a master's degree in electrical engineering and 15+ years of experience with advanced SI/PI simulation, hardware correlation, and high-performance computing systems.

Fabricates, assembles, integrates, and tests composite and metallic aircraft structures and prototype components. Requires hands-on composite manufacturing experience, including layups, vacuum bagging, curing, finishing, and bonded assembly.

Drives PTCRB and carrier certification for cellular-enabled drone products, coordinating labs, carriers, vendors, and internal engineering teams. Requires 5+ years of cellular certification or validation experience, strong LTE/5G expertise, and hands-on troubleshooting of RF, modem, protocol, and network issues.

Leads power delivery architecture and technology development for high-performance AI and advanced ASIC platforms, covering electrical performance, thermal management, vendor strategy, and production deployment. Requires a master’s degree or equivalent experience and 15+ years in power delivery systems.

Leads physical implementation and production release of complex, high-speed PCBs for AI and server systems. Requires 10+ years of PCB layout experience, strong SI/PI expertise, and proficiency with Cadence Allegro.

Drives vehicle design for serviceability by defining diagnostics requirements, developing diagnostic and controller-programming tools, and improving repair workflows. Requires a relevant engineering or automotive degree and at least five years of vehicle diagnostics experience.

Designs and operates automated manufacturing test systems for bikes and scooters, including software, electrical fixtures, firmware validation, and factory-floor troubleshooting. Requires a technical degree, hands-on test-station development, embedded-systems knowledge, and experience supporting production.

Own and optimize critical facility infrastructure supporting AI data center operations, including electrical, mechanical, cooling, and building management systems. The role requires at least three years of facilities or critical-infrastructure experience, strong troubleshooting skills, and familiarity with applicable safety and engineering standards.

Diagnose and prevent data center hardware failures, validate firmware and hardware releases, manage vendor RMAs, and build monitoring and reliability processes. Requires a bachelor’s degree or equivalent experience, 2+ years in hardware reliability, and scripting plus systems-language experience.

Designs, commissions, and maintains automated control systems for AI supercomputer campuses, including cooling plants, electrical distribution, liquid-cooling loops, and data halls. Requires an engineering bachelor’s degree and at least one year of industrial automation and controls experience.