Designs, prototypes, validates, and integrates mechanical and electrical subsystems for next-generation AI consumer devices through mass production. The role requires 6+ years of consumer hardware experience and a track record of launching products at scale.

Design, install, commission, and improve pilot-plant equipment for critical-mineral refining while supporting safe and reliable operations. The role requires a mechanical engineering degree, hands-on plant troubleshooting experience, and background in equipment design, scale-up, or industrial operations.

Supervises facilities technicians responsible for maintaining campus-wide mechanical, electrical, HVAC, plumbing, and utility systems across the Memphis and Southaven sites. The role requires facilities-management experience, technical systems knowledge, vendor and budget oversight, and team leadership.

Supervise facilities technicians responsible for maintaining HVAC, chilled water, electrical, plumbing, compressed air, and related campus systems across the Memphis and Southaven sites. The role requires facilities management experience, team leadership, vendor and budget oversight, and hands-on knowledge of mechanical equipment.

Own end-to-end electrical hardware design for semiconductor fabrication machines, from clean-sheet PCBAs and circuit development through prototyping, testing, integration, and production. Requires autonomous experience with analog, digital, mixed-signal, and PCB design.

Senior Controls Engineer leading SCADA, PLC, and machine-software development for manufacturing equipment from proof of concept through high-volume production. The role requires 8+ years of software engineering experience, substantial manufacturing-software expertise, and frequent travel to Indianapolis and Provo.

Leads manufacturing engineering for advanced propulsion and fluid-system hardware from development through production, including process development, integration, validation, and production support. Requires 7+ years of relevant experience, a bachelor's degree, and expertise in aerospace propulsion manufacturing and DFM/DFA.

Leads final system integration, assembly processes, and production readiness for complex aerospace and defense platforms. Requires 7+ years of manufacturing engineering or systems integration experience, a bachelor’s degree, and multidisciplinary electrical and mechanical integration expertise.

Leads manufacturing engineering for advanced ground vehicle systems, spanning prototype development, process optimization, vehicle integration, and production readiness. Requires 7+ years of relevant experience, a bachelor’s degree, and expertise in mechanical vehicle systems and DFM/DFA.

Leads manufacturing engineering for complex electromechanical assemblies, developing scalable processes, tooling, quality controls, and production readiness activities. Requires 7+ years of experience, a relevant bachelor's degree, and expertise in actuators, fluid systems, mechanical/electrical integration, and DFM/DFA.

Leads manufacturing engineering, process development, integration, and production support for advanced electrical and avionics systems used in aerospace and defense platforms. Requires 7+ years of relevant experience, a bachelor’s degree, and expertise in electrical assemblies, production scaling, and manufacturability.

Leads manufacturing process development and factory-scale production systems for advanced aerospace programs, including a new jet production line. Requires 7+ years of manufacturing experience, a bachelor’s degree, and an active Top Secret clearance.

Leads manufacturing process design, production scale-up, and infrastructure deployment for aerospace programs, including a new jet production line. Requires 7+ years of manufacturing engineering experience and technical leadership across engineering, supply chain, and production.

Leads factory design and manufacturing-system optimization for advanced aerospace products, including greenfield facilities, production layouts, capacity planning, material flow, simulation, and launch readiness. Requires a bachelor's degree and at least 8 years of relevant industrial or manufacturing engineering experience.

Leads advanced manufacturing engineering for prototype and production programs, including production-line infrastructure, process definition, equipment deployment, work instructions, and continuous improvement. Requires 10+ years of manufacturing experience and a bachelor’s degree in a relevant STEM discipline.

Leads composite manufacturing engineering across programs, including process optimization, production scale-up, and launch of a new jet production line. Requires 7+ years of manufacturing engineering experience, composite process expertise, CAD proficiency, and technical leadership.

Develop multidisciplinary hardware capabilities for an AI-powered automated engineering and design platform serving large-scale construction projects. The role suits hands-on engineers across mechanical, electrical, mechatronics, robotics, aerospace, and related disciplines, including new graduates through senior engineers.

Build, deploy, test, and troubleshoot electromechanical prototypes for a new product, collaborating across hardware and software teams to analyze failures and validate corrective actions. Requires hands-on mechanical and electrical prototyping experience and an engineering bachelor’s degree or expected degree.

Designs and releases high-density, multilayer PCBs for next-generation robotic systems, coordinating with electrical, mechanical, signal-integrity, power-integrity, and manufacturing teams. Requires 6+ years of complex PCB design experience and strong Cadence Allegro expertise.

Design, prototype, assemble, test, and debug precision electromechanical and optical systems for semiconductor lithography, metrology, and motion applications. Requires a Mechanical Engineering degree, 6+ years of relevant industry experience, precision machine design expertise, CAD proficiency, and optical system simulation experience.

Designs, constructs, operates, and maintains critical facilities and electrical systems across Memphis and Southaven sites. Requires an engineering bachelor’s degree, at least two years of facilities or construction experience, and AutoCAD or Revit proficiency.

Designs, commissions, operates, and maintains critical facilities and HVAC/mechanical systems across Memphis and Southaven sites. Requires a bachelor’s degree in engineering, at least two years of facilities or construction experience, and AutoCAD or Revit proficiency.

The Facilities Engineer designs, commissions, operates, and maintains critical facilities and utilities while managing multidisciplinary construction and capital projects. The role requires an engineering bachelor’s degree, at least two years of relevant experience, and proficiency with AutoCAD, Revit, or similar tools.

Maintains and troubleshoots critical MEP infrastructure supporting supercomputing data centers, including cooling, power, and environmental systems. Requires a mechanical or electrical degree or equivalent hands-on facilities experience, strong troubleshooting skills, and flexibility for 24x7 shift coverage.

Leads mechatronic architecture and system integration for high-precision robotic manufacturing machines, from prototyping through production. Requires 8+ years of machine-building experience, advanced robotics and motion-control expertise, and an engineering degree.

Electrical engineering co-op student contributing to autonomous aircraft hardware through circuit-board design, power electronics, avionics validation, automated testing, and reliability work. Requires completion of at least two years of a relevant degree and experience with electrical design tools.

Electrical Engineering Interns will design and validate avionics assemblies, test fixtures, and related power, communications, and RF systems. The role requires current enrollment in an Electrical Engineering or related STEM program and hands-on multidisciplinary hardware project experience.

Leads system-level architecture and optimization of high-density AI data center infrastructure, integrating power, cooling, controls, telemetry, and computational modeling. Requires significant hyperscale or mission-critical infrastructure experience and a technical bachelor’s degree.

Leads electrical engineering for data center and facility power infrastructure, including design, commissioning support, troubleshooting, and code compliance. Requires a bachelor’s degree and professional electrical project experience; leadership experience and a PE license are preferred.

Leads electrical engineering design, installation, maintenance, and troubleshooting for advanced facilities and data centers. Requires an engineering bachelor’s degree, 3+ years of relevant electrical project experience, and expertise in power systems; leadership experience and a PE license are preferred.

Leads supplier quality, industrialization, validation, and continuous improvement for automotive seating and vehicle interior suppliers. Requires a relevant engineering bachelor’s degree, 8+ years of quality or manufacturing experience, and hands-on expertise with interior commodities and manufacturing processes.

Formula SAE builder role designing, building, and flying lightweight mechanical subsystems for solar-powered stratospheric aircraft. Requires hands-on hardware experience, grit, and willingness to own subsystems end-to-end from concept to flight.

Designs and optimizes data center whitespace environments, integrating rack layouts, power, cooling, cabling, and redundancy for scalable cloud infrastructure. Requires a bachelor’s degree or equivalent experience, 7+ years of experience, and proficiency with CAD/BIM tools and data center standards.

Leads supplier qualification, audits, NPI quality, corrective actions, and continuous improvement for manufacturing suppliers. Requires a bachelor’s degree, 3+ years of relevant experience, strong quality-methodology expertise, engineering drawing literacy, and cross-functional influence.

Mechanical Design Engineering Intern supporting the design, tooling, testing, and integration of hardware for satellite ground stations. Requires current bachelor’s-level study in mechanical, aerospace, or a related engineering discipline and familiarity with CAD and mechanical design principles.

Supports high-speed PCB design, prototyping, testing, and validation for digital backend systems in a phased-array communications platform. The internship is intended for students pursuing electrical or computer engineering with relevant PCB and high-speed communications coursework or projects.

Supports RF hardware design, prototyping, characterization, and integrated performance testing for phased-array ground stations. Requires current Electrical Engineering study, foundational RF knowledge, Python or similar data-analysis experience, and at least one year of relevant project or lab experience.

Supports the design, construction, testing, and deployment of electrical and mechanical ground station hardware while helping troubleshoot live site operations. Applicants must be enrolled in an engineering degree program and able to relocate for a summer internship.

Design, build, test, and deploy electrical and mechanical hardware for satellite ground station sites. The internship requires enrollment in an engineering degree program, hands-on systems experience is preferred, and relocation to Los Angeles for the summer.

Design and bring consumer electronic products from prototype through mass production, covering mixed-signal circuitry, PCB design, testing, and reliability. The role is intended for a new graduate with a BSEE or equivalent and requires on-site work in San Francisco.

Leads industrial hygiene programs and complex exposure assessments across manufacturing, laboratory, and controlled environments. The role requires a bachelor’s degree, at least seven years of experience, strong regulatory expertise, hands-on sampling skills, and the ability to guide cross-functional teams.

Develop mechanical and electromechanical products from concept through high-volume production, including CAD, prototyping, testing, and analysis. The role requires a mechanical engineering degree, hands-on design experience, and familiarity with manufacturing and quality methods.

Maintains and repairs plumbing, pumping, drainage, treatment, and related mechanical systems supporting high-volume manufacturing. Requires a high school diploma or equivalent, at least three years of plumbing experience, troubleshooting ability, and safe hands-on work in demanding environments.

Provides design support, inspections, commissioning, and compliance expertise for facility fire and life safety systems. Requires a high school diploma and at least two years of fire protection systems or consulting experience; fire protection engineering education and relevant certifications are preferred.

Leads supplier qualification, audits, NPI readiness, performance monitoring, and corrective actions for complex hardware components and systems. Requires an engineering bachelor’s degree and 7–10+ years of supplier or manufacturing quality experience across electronics, electromechanical, and mechanical commodities.

Electrical engineering intern designing and validating compact RF power systems for semiconductor plasma applications. The role requires hands-on RF prototyping, resonant power amplifier design, power measurement, and systems integration experience.

Build and test semiconductor fabrication equipment through mechanical design, prototyping, simulation, and production collaboration. Candidates should be pursuing an engineering degree and demonstrate hands-on electromechanical project experience through a portfolio.

Summer internship supporting aerospace manufacturing programs through planning, logistics, prototype builds, quality analysis, and process improvement. Candidates should be pursuing an engineering degree and demonstrate strong analytical, organizational, and communication skills.

Design and prototype PCBAs and electrical systems for semiconductor fabrication equipment, taking projects from schematic and layout through testing, integration, and documentation. The role requires an engineering student with strong electrical fundamentals and hands-on prototyping experience.

Hands-on winter internship developing and integrating semiconductor packaging equipment and processes. Candidates should be pursuing an engineering degree, have lab and prototyping experience, and provide a portfolio of built projects.